The Business Resource Centre | Course Types Process Control & Improvement

AIAG & VDA FMEA 1st Edition

July 18, 2019/in Quality Management, Automotive, Manufacturing Services, Auditing & Quality Skills FMEA, Core Tools, Risk Management Risk Management, Process Control & Improvement /by The BRC

⚙Overview

AIAG & VDA FMEA 1st Edition

A Core Tool of the APQP process, Failure Mode and Effects Analysis (FMEA) is an analytical methodology that employs the evaluation and assessment of risk to ensure that potential problems have been considered and addressed throughout the product and process development process.

The AIAG & VDA FMEA 1^st Edition Handbook was released in 2019 and incorporates best practices from both:

AIAG – Automotive Industry Action Group
VDA – German Associate of the Auto Industry

This course provides a detailed look at AIAG & VDA FMEA 1st Edition and provides participants with the knowledge and skills necessary to understand and interpret the requirements for their respective companies and how to develop and implement FMEAs within their organization’s operations.

Who Should Take It

Quality Managers and Quality Team Leaders
Individuals with direct involvement in product and process design.
Individuals / team members wanting a better understanding of the quality planning process.

Learning Objectives

Through a combination of presentation, discussion and group exercises, participants will gain a working knowledge of the following elements that are based on AIAG & VDA FMEA 1st Edition (2019) requirements:

Introduction to the Role of FMEA in Quality Planning

History, purpose, uses and definitions.
When FMEAs are performed and who should be involved.

Transition from 4^th Edition FMEA to AIAG & VDA FMEA 1^st Edition

Overview of the major changes, improvements, and benefits of the AIAG & VDA FMEA 1^st Edition (2019) as compared to the AIAG 4^th Edition.

Design FMEA (DFMEA)

Uses and benefits.
Applying the 7-step approach to creating a Design FMEA.
Use of diagrams (Boundary Diagram, Parameter Diagram, etc.).
Review of Design FMEA forms and steps in their use.
DFMEA Severity, Occurrence and Detection Criteria.
Linkages from Design FMEA to Process FMEA.
Follow-up actions.
Workshop exercise in Design FMEA.

Process FMEA (PFMEA)

Uses and benefits.
Applying the 7-step approach to creating a Process FMEA.
Review of Process FMEA forms and steps in their use.
PFMEA Severity, Occurrence and Detection Criteria
Linkages of Process Flow and PFMEA to Control Plan and Work Instructions.
Follow-up actions.
Workshop exercise in Process FMEA.

FMEA Implementation

Guidance on steps and best practices for the effective implementation of an AIAG & VDA FMEA program OR transition of FMEA activities from AIAG 4^th Edition.

Prerequisites

None. This is an introductory course.

Previous experience with risk assessment tools and techniques is beneficial but not required.

Experience with previous editions of FMEA (e.g. AIAG 4^th Edition) is beneficial but not required.

This course is equally suitable for the implementation of a new FMEA program or transition from AIAG 4^th Edition to AIAG & VDA FMEA 1^st Edition.

Click Here to Download Course Outline

Course Details

Name: AIAG & VDA FMEA 1st Edition

Price: $1050

Duration: 2 day(s)

Sector(s): Quality Management, Automotive, Manufacturing Services, Auditing & Quality Skills

Discipline(s): FMEA, Core Tools, Risk Management

Type: Risk Management, Process Control & Improvement

Public Course Dates

This course is available as on-site training only. Click on the On-Site Training tab for more details and to request a quote.

⌂On-Site Training

AIAG & VDA FMEA 1st Edition

On-site group training is delivered at your place of business and can be customized to meet your specific requirements. Contact The Business Resource Centre to schedule your next on-site group training event.

Please call 1-888-535-1401 or fill out the form below to request a quote.

👥Public Training

AIAG & VDA FMEA 1st Edition

Public training is available for this course. Locations and dates can be found using the form below. Please fill out and submit the form to register for this course.

Course Information
Location*
Date*
Number of Participants*
Please enter a value between 1 and 10.
Participant #1
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #2
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #3
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #4
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #5
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #6
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #7
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #8
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #9
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #10
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Company Information
Company Name*
Address 1*
Address 2
Mailing Address (PO Box, etc.)
City*
Province*
Postal Code (ex. N5N5N5)*
Contact Person (responsible for this registration)*
FirstLast
Title*
Work Phone*
Extension (if applicable)
Cell Phone
Contact Email*
Payment Information
Note: Course registration fees are invoiced 2 weeks in advance of course dates. Invoice may be submitted for payment by cheque or paid by credit card. Course fees are not required to be paid in advance of course dates.
Payment Method*
- I intend to pay by company cheque
- I intend to pay by credit card
- Not sure at the moment
Person invoice should be sent to:
Name*
FirstLast
Email*
Phone*
Additional Information
Comments / Questions
Captcha
Please enter the characters shown in the image into the text box above.

Online Training

Online training is available for this course. Please fill out and submit the form to register for this course.

Core Tools (FMEA, MSA, PPAP, APQP, SPC)

November 6, 2013/in Automotive Core Tools, TS 16949:2009 Process Control & Improvement, Statistics & Measurements /by admin

⚙Overview

Provides participants with a working knowledge of FMEA, APQP and PPAP through discussions, presentations and hands–on exercises. Also includes an introduction to MSA and SPC and outlines how they can be used as a tool in your Quality Management System.

Full Course Outline

Course Details

Name: Core Tools (FMEA, MSA, PPAP, APQP, SPC)

Price: $1050

Duration: 2 day(s)

Sector(s): Automotive

Discipline(s): Core Tools, TS 16949:2009

Type: Process Control & Improvement, Statistics & Measurements

Public Course Dates

This course is available as on-site training only. Click on the On-Site Training tab for more details and to request a quote.

⌂On-Site Training

On-site group training is delivered at your place of business and can be customized to meet your specific requirements. Contact The Business Resource Centre to schedule your next on-site group training event.

Please call 1-888-535-1401 or fill out the form below to request a quote.

👥Public Training

Public training is available for this course. Locations and dates can be found using the form below. Please fill out and submit the form to register for this course.

Course Information
Location*
Date*
Number of Participants*
Please enter a value between 1 and 10.
Participant #1
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #2
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #3
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #4
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #5
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #6
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #7
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #8
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #9
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #10
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Company Information
Company Name*
Address 1*
Address 2
Mailing Address (PO Box, etc.)
City*
Province*
Postal Code (ex. N5N5N5)*
Contact Person (responsible for this registration)*
FirstLast
Title*
Work Phone*
Extension (if applicable)
Cell Phone
Contact Email*
Payment Information
Note: Course registration fees are invoiced 2 weeks in advance of course dates. Invoice may be submitted for payment by cheque or paid by credit card. Course fees are not required to be paid in advance of course dates.
Payment Method*
- I intend to pay by company cheque
- I intend to pay by credit card
- Not sure at the moment
Person invoice should be sent to:
Name*
FirstLast
Email*
Phone*
Additional Information
Comments / Questions
Captcha
Please enter the characters shown in the image into the text box above.

Online Training

Online training is available for this course. Please fill out and submit the form to register for this course.

TPM (Total Productive Maintenance) & Set-Up Reduction

November 6, 2013/in Automotive, Manufacturing Services TS 16949:2009, TPM (Total Productive Maintenance) Process Control & Improvement /by admin

⚙Overview

This course provides training on the removal of waste from the production process through Total Productive Maintenance (TPM) and Set-Up Reduction. Participants will examine the role of TPM in eliminating waste associated with production equipment and machinery by engaging all levels and functions within an organization, as well as the process of Set-Up Reduction as a way to help organizations identify and eliminate waste associated with preparing manufacturing processes for a new part.

(Full course outline available.)

Course Details

Name: TPM (Total Productive Maintenance) & Set-Up Reduction

Duration: 1 day(s)

Sector(s): Automotive, Manufacturing Services

Discipline(s): TS 16949:2009, TPM (Total Productive Maintenance)

Type: Process Control & Improvement

Public Course Dates

This course is available as on-site training only. Click on the On-Site Training tab for more details and to request a quote.

⌂On-Site Training

On-site group training is delivered at your place of business and can be customized to meet your specific requirements. Contact The Business Resource Centre to schedule your next on-site group training event.

Please call 1-888-535-1401 or fill out the form below to request a quote.

👥Public Training

Public training is available for this course. Locations and dates can be found using the form below. Please fill out and submit the form to register for this course.

Course Information
Location*
Date*
Number of Participants*
Please enter a value between 1 and 10.
Participant #1
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #2
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #3
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #4
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #5
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #6
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #7
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #8
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #9
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #10
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Company Information
Company Name*
Address 1*
Address 2
Mailing Address (PO Box, etc.)
City*
Province*
Postal Code (ex. N5N5N5)*
Contact Person (responsible for this registration)*
FirstLast
Title*
Work Phone*
Extension (if applicable)
Cell Phone
Contact Email*
Payment Information
Note: Course registration fees are invoiced 2 weeks in advance of course dates. Invoice may be submitted for payment by cheque or paid by credit card. Course fees are not required to be paid in advance of course dates.
Payment Method*
- I intend to pay by company cheque
- I intend to pay by credit card
- Not sure at the moment
Person invoice should be sent to:
Name*
FirstLast
Email*
Phone*
Additional Information
Comments / Questions
Captcha
Please enter the characters shown in the image into the text box above.

Online Training

Online training is available for this course. Please fill out and submit the form to register for this course.

Process Mapping

November 6, 2013/in Auditing & Quality Skills Process Mapping Process Control & Improvement /by admin

⚙Overview

This course will provide the participants with an understanding of what a process is and how to define it. Participants will use real life problems to learn the practical techniques required to develop Process Maps and how to use Process Mapping as a tool for process analysis and improvement.

Full Course Outline

Course Details

Name: Process Mapping

Price: $995

Duration: 2 day(s)

Sector(s): Auditing & Quality Skills

Discipline(s): Process Mapping

Type: Process Control & Improvement

Public Course Dates

This course is available as on-site training only. Click on the On-Site Training tab for more details and to request a quote.

⌂On-Site Training

On-site group training is delivered at your place of business and can be customized to meet your specific requirements. Contact The Business Resource Centre to schedule your next on-site group training event.

Please call 1-888-535-1401 or fill out the form below to request a quote.

👥Public Course Dates

Public training is available for this course. Locations and dates can be found using the form below. Please fill out and submit the form to register for this course.

Course Information
Location*
Date*
Number of Participants*
Please enter a value between 1 and 10.
Participant #1
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #2
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #3
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #4
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #5
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #6
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #7
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #8
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #9
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #10
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Company Information
Company Name*
Address 1*
Address 2
Mailing Address (PO Box, etc.)
City*
Province*
Postal Code (ex. N5N5N5)*
Contact Person (responsible for this registration)*
FirstLast
Title*
Work Phone*
Extension (if applicable)
Cell Phone
Contact Email*
Payment Information
Note: Course registration fees are invoiced 2 weeks in advance of course dates. Invoice may be submitted for payment by cheque or paid by credit card. Course fees are not required to be paid in advance of course dates.
Payment Method*
- I intend to pay by company cheque
- I intend to pay by credit card
- Not sure at the moment
Person invoice should be sent to:
Name*
FirstLast
Email*
Phone*
Additional Information
Comments / Questions
Captcha
Please enter the characters shown in the image into the text box above.

Online Training

Online training is available for this course. Please fill out and submit the form to register for this course.

ISO 19011 & The Process Approach to Auditing

November 6, 2013/in Auditing & Quality Skills ISO 19011 Auditing Skills, Process Control & Improvement /by admin

⚙Overview

ISO 19011 & The Process Approach to Auditing

Course Description

This course will provide participants with a greater understanding of ISO 19011:2018 – Guidelines for Auditing Management Systems and will explore and explain the concept of the Process Approach to Auditing.

The ISO 9001, 14001 and 45001 series of international standards (along with many others) emphasize the importance of audits as a key management tool for achieving the objectives set out in an organization’s policy for systems management. This ISO 19011:2018 standard provides definitions of audit related terms and offers guidance and best practices to auditors and organizations needing to conduct and manage internal and external management system audits.

Who Should Take It

Individuals who have completed an Internal Auditor Course and wish to understand the ISO 19011:2018 Guidelines for Auditing Management Systems and the Process Approach to Auditing.
Individuals who feel they need a little bit more training, coaching and practice to enhance the effectiveness of their auditing skills.

Learning Objectives

Through a combination of presentation, discussion and interactive group exercises, participants will:

Understand the definition of a process and the different types of processes.
Practice implementation of the Process Approach using sample procedures and organizations.
Learn the characteristics and skills of an effective auditor.
Understand the process for determining and evaluating the competencies required for certain audits.
Practice the key steps in preparing for, carrying out, and following up after an audit.
Improve their ability to perform internal and external audits using the 19011:2018 standard and the Process Approach to auditing.

Prerequisites

Some previous experience with ISO standards and auditing is strongly suggested.

Click Here for the Full Course Outline

Course Details

Name: ISO 19011 & The Process Approach to Auditing

Duration: 2 day(s)

Sector(s): Auditing & Quality Skills

Discipline(s): ISO 19011

Type: Auditing Skills, Process Control & Improvement

Public Course Dates

This course is available as on-site training only. Click on the On-Site Training tab for more details and to request a quote.

⌂On-Site Training

On-site group training is delivered at your place of business and can be customized to meet your specific requirements. Contact The Business Resource Centre to schedule your next on-site group training event.

Please call 1-888-535-1401 or fill out the form below to request a quote.

👥Public Training

Public training is available for this course. Locations and dates can be found using the form below. Please fill out and submit the form to register for this course.

Course Information
Location*
Date*
Number of Participants*
Please enter a value between 1 and 10.
Participant #1
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #2
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #3
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #4
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #5
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #6
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #7
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #8
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #9
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #10
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Company Information
Company Name*
Address 1*
Address 2
Mailing Address (PO Box, etc.)
City*
Province*
Postal Code (ex. N5N5N5)*
Contact Person (responsible for this registration)*
FirstLast
Title*
Work Phone*
Extension (if applicable)
Cell Phone
Contact Email*
Payment Information
Note: Course registration fees are invoiced 2 weeks in advance of course dates. Invoice may be submitted for payment by cheque or paid by credit card. Course fees are not required to be paid in advance of course dates.
Payment Method*
- I intend to pay by company cheque
- I intend to pay by credit card
- Not sure at the moment
Person invoice should be sent to:
Name*
FirstLast
Email*
Phone*
Additional Information
Comments / Questions
Captcha
Please enter the characters shown in the image into the text box above.

Online Training

Online training is available for this course. Please fill out and submit the form to register for this course.

Process Mapping, Problem Solving & Continual Improvement

November 6, 2013/in Auditing & Quality Skills Process Mapping Problem Solving & Continual Improvement, Process Control & Improvement /by admin

⚙Overview

This course provides an understanding of the interrelated subjects of Process Mapping, Problem Solving and Continuous Improvement. Participants will learn the practical techniques required to develop Process Maps and use Process Mapping as a tool for process analysis and improvement within the organization. Different problem solving methodologies are introduced as a point of reference, but the focus will be on specific tools and how they can be used to solve problems and drive continual improvement.

Full Course Outline

Course Details

Name: Process Mapping, Problem Solving & Continual Improvement

Duration: 2 day(s)

Sector(s): Auditing & Quality Skills

Discipline(s): Process Mapping

Type: Problem Solving & Continual Improvement, Process Control & Improvement

Public Course Dates

This course is available as on-site training only. Click on the On-Site Training tab for more details and to request a quote.

⌂On-Site Training

On-site group training is delivered at your place of business and can be customized to meet your specific requirements. Contact The Business Resource Centre to schedule your next on-site group training event.

Please call 1-888-535-1401 or fill out the form below to request a quote.

👥Public Training

Public training is available for this course. Locations and dates can be found using the form below. Please fill out and submit the form to register for this course.

Course Information
Location*
Date*
Number of Participants*
Please enter a value between 1 and 10.
Participant #1
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #2
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #3
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #4
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #5
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #6
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #7
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #8
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #9
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #10
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Company Information
Company Name*
Address 1*
Address 2
Mailing Address (PO Box, etc.)
City*
Province*
Postal Code (ex. N5N5N5)*
Contact Person (responsible for this registration)*
FirstLast
Title*
Work Phone*
Extension (if applicable)
Cell Phone
Contact Email*
Payment Information
Note: Course registration fees are invoiced 2 weeks in advance of course dates. Invoice may be submitted for payment by cheque or paid by credit card. Course fees are not required to be paid in advance of course dates.
Payment Method*
- I intend to pay by company cheque
- I intend to pay by credit card
- Not sure at the moment
Person invoice should be sent to:
Name*
FirstLast
Email*
Phone*
Additional Information
Comments / Questions
Captcha
Please enter the characters shown in the image into the text box above.

Online Training

Online training is available for this course. Please fill out and submit the form to register for this course.

Understanding 5S

November 6, 2013/in Manufacturing Services Lean Manufacturing & Six Sigma Process Control & Improvement /by admin

⚙Overview

As one of the tools included in the “Lean Tool Kit”, the 5S methodology strives to establish a stable manufacturing environment through creation of an organized, clean, safe and high-performance workplace, and is a prerequisite for many of the other waste reduction tools. This course introduces the concepts, steps and techniques required to involve employees in a systematic improvement of the workplace, processes and products. Through a combination of lecture and team exercises, participants will learn the basics of using 5S as a tool to improve cleanliness, reduce waste, and increase efficiency in the workplace.

Full Course Outline

Course Details

Name: Understanding 5S

Duration: 1 day(s)

Sector(s): Manufacturing Services

Discipline(s): Lean Manufacturing & Six Sigma

Type: Process Control & Improvement

Public Course Dates

This course is available as on-site training only. Click on the On-Site Training tab for more details and to request a quote.

⌂On-Site Training

On-site group training is delivered at your place of business and can be customized to meet your specific requirements. Contact The Business Resource Centre to schedule your next on-site group training event.

Please call 1-888-535-1401 or fill out the form below to request a quote.

👥Public Training

Public training is available for this course. Locations and dates can be found using the form below. Please fill out and submit the form to register for this course.

Course Information
Location*
Date*
Number of Participants*
Please enter a value between 1 and 10.
Participant #1
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #2
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #3
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #4
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #5
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #6
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #7
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #8
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #9
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #10
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Company Information
Company Name*
Address 1*
Address 2
Mailing Address (PO Box, etc.)
City*
Province*
Postal Code (ex. N5N5N5)*
Contact Person (responsible for this registration)*
FirstLast
Title*
Work Phone*
Extension (if applicable)
Cell Phone
Contact Email*
Payment Information
Note: Course registration fees are invoiced 2 weeks in advance of course dates. Invoice may be submitted for payment by cheque or paid by credit card. Course fees are not required to be paid in advance of course dates.
Payment Method*
- I intend to pay by company cheque
- I intend to pay by credit card
- Not sure at the moment
Person invoice should be sent to:
Name*
FirstLast
Email*
Phone*
Additional Information
Comments / Questions
Captcha
Please enter the characters shown in the image into the text box above.

Online Training

Online training is available for this course. Please fill out and submit the form to register for this course.

Lean Six Sigma Executive Overview

November 6, 2013/in Manufacturing Services Lean Manufacturing & Six Sigma Process Control & Improvement /by admin

⚙Overview

An overview of Lean Six Sigma methodologies for executive management. Various improvement methodologies will be reviewed with a focus on how Lean Six Sigma has developed and how the concepts and methods apply in today’s business environment. This overview emphasizes the role of the leadership team in the deployment and successful execution of a Lean Six Sigma strategy.

Full Course Outline

Course Details

Name: Lean Six Sigma Executive Overview

Duration: 1/2 day(s)

Sector(s): Manufacturing Services

Discipline(s): Lean Manufacturing & Six Sigma

Type: Process Control & Improvement

Public Course Dates

This course is available as on-site training only. Click on the On-Site Training tab for more details and to request a quote.

⌂On-Site Training

On-site group training is delivered at your place of business and can be customized to meet your specific requirements. Contact The Business Resource Centre to schedule your next on-site group training event.

Please call 1-888-535-1401 or fill out the form below to request a quote.

👥Public Training

Public training is available for this course. Locations and dates can be found using the form below. Please fill out and submit the form to register for this course.

Course Information
Location*
Date*
Number of Participants*
Please enter a value between 1 and 10.
Participant #1
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #2
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #3
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #4
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #5
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #6
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #7
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #8
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #9
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #10
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Company Information
Company Name*
Address 1*
Address 2
Mailing Address (PO Box, etc.)
City*
Province*
Postal Code (ex. N5N5N5)*
Contact Person (responsible for this registration)*
FirstLast
Title*
Work Phone*
Extension (if applicable)
Cell Phone
Contact Email*
Payment Information
Note: Course registration fees are invoiced 2 weeks in advance of course dates. Invoice may be submitted for payment by cheque or paid by credit card. Course fees are not required to be paid in advance of course dates.
Payment Method*
- I intend to pay by company cheque
- I intend to pay by credit card
- Not sure at the moment
Person invoice should be sent to:
Name*
FirstLast
Email*
Phone*
Additional Information
Comments / Questions
Captcha
Please enter the characters shown in the image into the text box above.

Online Training

Online training is available for this course. Please fill out and submit the form to register for this course.

APQP (Advanced Product Quality Planning)

November 6, 2013/in Automotive, Manufacturing Services TS 16949:2009, APQP, Core Tools Process Control & Improvement /by admin

⚙Overview

This course provides a detailed introduction to Advanced Product Quality Planning, a framework of procedures and techniques used to produce a product quality plan that will support development of a product or service to satisfy the customer. Participants will learn APQP’s five stage product quality planning process supported by the “Plan-Do-Check-Act” cycle, with a focus on preventative measures that can be used to assure product integrity.

Full Course Outline

Course Details

Name: APQP (Advanced Product Quality Planning)

Duration: 1 day(s)

Sector(s): Automotive, Manufacturing Services

Discipline(s): TS 16949:2009, APQP, Core Tools

Type: Process Control & Improvement

Public Course Dates

This course is available as on-site training only. Click on the On-Site Training tab for more details and to request a quote.

⌂On-Site Training

On-site group training is delivered at your place of business and can be customized to meet your specific requirements. Contact The Business Resource Centre to schedule your next on-site group training event.

Please call 1-888-535-1401 or fill out the form below to request a quote.

👥Public Training

Public training is available for this course. Locations and dates can be found using the form below. Please fill out and submit the form to register for this course.

Course Information
Location*
Date*
Number of Participants*
Please enter a value between 1 and 10.
Participant #1
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #2
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #3
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #4
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #5
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #6
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #7
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #8
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #9
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #10
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Company Information
Company Name*
Address 1*
Address 2
Mailing Address (PO Box, etc.)
City*
Province*
Postal Code (ex. N5N5N5)*
Contact Person (responsible for this registration)*
FirstLast
Title*
Work Phone*
Extension (if applicable)
Cell Phone
Contact Email*
Payment Information
Note: Course registration fees are invoiced 2 weeks in advance of course dates. Invoice may be submitted for payment by cheque or paid by credit card. Course fees are not required to be paid in advance of course dates.
Payment Method*
- I intend to pay by company cheque
- I intend to pay by credit card
- Not sure at the moment
Person invoice should be sent to:
Name*
FirstLast
Email*
Phone*
Additional Information
Comments / Questions
Captcha
Please enter the characters shown in the image into the text box above.

Online Training

Online training is available for this course. Please fill out and submit the form to register for this course.

MSA (Measurement Systems Analysis)

November 6, 2013/in Automotive, Manufacturing Services TS 16949:2009, MSA, Core Tools Process Control & Improvement, Statistics & Measurements /by admin

⚙Overview

This course provides a detailed introduction to Measurement Systems Analysis, an approach used to evaluate the test method, measuring instruments, and the entire process of obtaining measurements to ensure the integrity of data used for analysis and to understand the implications of measurement error for decisions made about a product or process. The nature of measurement systems, and the fundamental analysis used to examine them, will be explored.

Full Course Outline

Course Details

Name: MSA (Measurement Systems Analysis)

Duration: 2 day(s)

Sector(s): Automotive, Manufacturing Services

Discipline(s): TS 16949:2009, MSA, Core Tools

Type: Process Control & Improvement, Statistics & Measurements

Public Course Dates

This course is available as on-site training only. Click on the On-Site Training tab for more details and to request a quote.

⌂On-Site Training

On-site group training is delivered at your place of business and can be customized to meet your specific requirements. Contact The Business Resource Centre to schedule your next on-site group training event.

Please call 1-888-535-1401 or fill out the form below to request a quote.

👥Public Training

Public training is available for this course. Locations and dates can be found using the form below. Please fill out and submit the form to register for this course.

Course Information
Location*
Date*
Number of Participants*
Please enter a value between 1 and 10.
Participant #1
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #2
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #3
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #4
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #5
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #6
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #7
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #8
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #9
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Participant #10
Name*
FirstLast
Job Title*
Email*
Cell Phone*
(for emergency contact outside of work hours - inclement weather, etc.)
Company Information
Company Name*
Address 1*
Address 2
Mailing Address (PO Box, etc.)
City*
Province*
Postal Code (ex. N5N5N5)*
Contact Person (responsible for this registration)*
FirstLast
Title*
Work Phone*
Extension (if applicable)
Cell Phone
Contact Email*
Payment Information
Note: Course registration fees are invoiced 2 weeks in advance of course dates. Invoice may be submitted for payment by cheque or paid by credit card. Course fees are not required to be paid in advance of course dates.
Payment Method*
- I intend to pay by company cheque
- I intend to pay by credit card
- Not sure at the moment
Person invoice should be sent to:
Name*
FirstLast
Email*
Phone*
Additional Information
Comments / Questions
Captcha
Please enter the characters shown in the image into the text box above.

Online Training

Online training is available for this course. Please fill out and submit the form to register for this course.

AIAG & VDA FMEA 1st Edition

Who Should Take It

Learning Objectives

Prerequisites

Course Details

Public Course Dates

AIAG & VDA FMEA 1st Edition

AIAG & VDA FMEA 1st Edition

Course Information

Participant #1

Participant #2

Participant #3

Participant #4

Participant #5

Participant #6

Participant #7

Participant #8

Participant #9

Participant #10

Company Information

Payment Information

Additional Information

Course Details

Public Course Dates

Course Information

Participant #1

Participant #2

Participant #3

Participant #4

Participant #5

Participant #6

Participant #7

Participant #8

Participant #9

Participant #10

Company Information

Payment Information

Additional Information

Course Details

Public Course Dates

Course Information

Participant #1

Participant #2

Participant #3

Participant #4

Participant #5

Participant #6

Participant #7

Participant #8

Participant #9

Participant #10

Company Information

Payment Information

Additional Information

Course Details

Public Course Dates

Course Information

Participant #1

Participant #2

Participant #3

Participant #4

Participant #5

Participant #6

Participant #7

Participant #8

Participant #9

Participant #10

Company Information

Payment Information

Additional Information

ISO 19011 & The Process Approach to Auditing

Course Description

Who Should Take It

Learning Objectives

Prerequisites

Course Details

Public Course Dates

Course Information

Participant #1

Participant #2